The PanelDue is a full-colour touch-sensitive graphical control panel for 3D printers. Although primarily intended for use with Duet electronics, it should also work with other 3D printer electronics that supports a true serial port and includes the required support in the firmware.
Supported displays | ITDB02-4.3 and ITDB02-5.0 from Itead Studio, and alternative 4.3 inch, 5 inch and 7 inch displays display (see text). |
Power requirement | 5V power from host 3D printer |
Supply current | Board only: 35mA With ITDB02-3.2WD display: 130mA With ITDB02-4.3 display: 200mA With alternative 4.3 inch display: 280mA With ITDB02-5.0 display: 300mA With 7 inch display: 650mA |
Interface | 2-wire serial interface with 3.3V signal level (5V tolerant input). An external pullup resistor can be added to improve noise margin when driving 5V printer electronics. |
Processor | On-board ATSAM3S2B processor with ARM Cortex M3 core, 128Kb flash memory and 32K RAM |
Options | Pads provided for making connections to the SD card holder on the back of the display. Pads provided for 3 uncommitted outputs and ground from the on-board processor |
with crimp connectors with 0.8m cable UK 36 GBP UK 41 GBP EU 39 GBP EU 44 GBP Rest of World 39 GBP Rest of World 43 GBP