RepRapFirmware bed.g file generator

Instructions

  1. Complete the fields below.
  2. Press Generate to create the commands.
  3. Copy and paste the text in the Result box into your bed.g file.
  4. If your Z probe has significantly different trigger heights depending on XY position, adjust the H parameters in the G30 commands accordingly. The value of each H parameter should be (trigger height at that XY position) - (trigger height at centre of bed).

You can send feedback to me using the Contact form.

Calculator © 2015 Escher Technologies Ltd.

Number of probe points: 4 7 10 13
Number of calibration factors: 3 4 6 7
Probing radius:
Probe offset from nozzle: X: Y:
Options: Home towers at start
Deploy/retract probe